- 52 -
Thread tension selector
2 e
4. Pull the end of the thread about 10 cm (4”) out
from the looper eyelet.
5. Lift the sewing foot
o
and slide the thread under
it; then lower the sewing foot
o
back down. The
lever for lifting and lowering the sewing foot
o
is located at the rear of the machine, above the
sewing lever rod system.
Position the lever to lift the sewing foot
o
Thread routing behind the front flap
8
Thread routing on from the thread guide plate
8
Threading yarns into the needle
For simplification, the individual steps are numbered
on the illustrations (1
q
, 2
w
, 3
e
, 4
r
, ...).
1. Turn the handwheel
6
to yourself until the needles
stand fully at the top.
2. Thread the left and right yarns as shown.
Thread tree
1
(on the left)
Thread guide
r
and thread guide plate
t
(on the left)
IB_KH4300_33077_LB5.qxd 02.06.2009 16:52 Uhr Seite 52
