background image

- 18 -

Battery operation:

To save energy, the display illumination is deactivated in battery 
operation. 
1. Press the button 

SNOOZE/DISPLAY DIMMER

The display is illuminated for ca. five seconds.

Projection of the time

For the time display to be well visible on a wall or ceiling, the room must
be darkened.

Important:

The time display projection is created with an LED. 
NEVER look directly at the lightbeam. NEVER direct the lightbeam at 
other people or animals.

Mains power operation:

1. Press the button 

PROJECTION ON/OFF

.

The projection lens glows permanently. 

2. Swivel the projection lens in the desired direction. 

The time is projected onto the selected position. The projection 
distance ranges from ca. 0,4 m to 4,0 m

3. Adjust the sharpness of the projection with the slider 

FOCUS

.

You can turn the projection of the time through ca. 90° with infinite
variability. 

4. Turn the adjustment wheel 

ROTATE PROJECTION

You can turn or mirror the projection of the time through 180°. 

5. Press the button 

PROJECTION REVERSE

.

6. To switch the projection off, press the button 

PROJECTION ON/OFF

once

again. The projection lens extinguishes.

IB_KH2217_AR23896_LB6  24.09.2008  15:33 Uhr  Seite 18

Summary of Contents for KH 2217





























Reviews: