Silvercrest KH 2198, Operating Instructions Manual

Page: 69 / 74

Snooze Function
Pressing the SNOOZE r button interrupts the alarm tone for approx. 8 minutes.
For as long as the snooze function is activated the indicator "Zz" blinks in the
display. After these 8 minutes, the alarm tone is repeated. Place the switch
ALARM ON/OFF/AUTO
e at "OFF" to switch the alarm function off com-
pletely.
Wakening with the alarm tone
When the clock is set correctly, as described above:
1. Place the sound volume controller OFF/BUZZ/VOLUME
o at
"OFF/BUZZ". A "Click" will be heard.
2. To activate a wake-up call with the alarm tone place the ALARM ON/
OFF/AUTO e at "AUTO". The symbol for the alarm function and
"Zz" appear in the display i .
The alarm tone sounds at the set time and then switches itself off after about
one minute. The radio alarm sounds again on the next day at the set alarm
time. Place the switch ALARM ON/OFF/AUTO
e at "OFF" to disable the
alarm completely.
Projection
Attention! When used properly, the radiation from the projection of the
display is not at all dangerous!. However, avoid looking directly into the
light beam and do not aim the beam at other persons or at animals.
To display the time correctly on a wall or the ceiling, the hinged projection
element needs to be swivelled into the correct position and the room must
be appropriately darkened..
1. Place the PROJECTION ON/OFF u switch at ON.
2. Adjust the projection element as desired. The time is projected onto the
required position. The projection distance is approx. 40cm - 3m.
3. Adjust the clarity of the projection with the projection focus l .
- 67 -
IB_KH2198_99_DT49173_LB5new.qxd 26.02.2010 9:41 Uhr Seite 67