Silvercrest KH 2187, Operating Instructions Manual

Page: 7 / 66

- 5 -
Attention!
Do not permit small children to play with the
plastic packaging. There is a risk of suffocation!
• Position the radio alarm on a level and horizontal
surface.
Inserting the batteries
Power-cut protection
Through the insertion of a 9 V block battery (Type
6LR61) you will avoid that, in the event of a power
failure, the functioning of the device is interrupted
and, as a result, saved settings, such as time and alarm
time, are lost. The battery ensures that the radio
alarm continues to function with an emergency
operation, also during a power failure. On restoration
of the power supply, the correct time will appear
automatically on the display
f .
Note:
The alarm, radio and display do not function
with battery-power.
• Open the battery compartment w and insert
a 9 V block battery (Type 6LR61).
Handling batteries
Leaking batteries can cause damage to the
radio alarm.
• If you do not intend to use the device for an
extended period, remove the battery.
• Should the batteries leak, clean the battery
compartment with a dry cloth whilst wearing
protective gloves.
Note:
Rechargable batteries cannot be charged via
the battery connection. In the event of an extended
power cut (several hours), the clock and alarm
times must be checked and possibly re-adjusted.
Assembly
Before operating the device, make sure that it is in
a faultless condition. If it is not, it may not be used.
• Insert the plug into a power socket. Select a power
socket that is at all times easily accessible, so that
the plug can be quickly withdrawn in the event of
a malfunction.
Setting the clock
When you take the device into use for the first
time after inserting a new battery:
Whilst pressing and holding the button
TIME
s :
• Repeatedly press, or press and hold, the button
HOUR
y to set the hours.
• Release the
HOUR
y button as soon as the required
hour indicator is shown in the display f .
• Repeatedly press, or press and hold, the button
MIN
resp.
MINUTE
u to set the minutes.
• Release the
MIN
resp.
MINUTE
u button as soon
as the required minute indicator is shown in the
display
f .
The programmed time setting is automatically accepted
as soon as the button
TIME
s is released.
Radio Reception
• Place the slider switch h at the position
ON
.
• Ensure that the switch
RADIO/ALARM
j
is at the
position
RADIO
.
• Turn the volume regulator g to a midway position.
• Select the radio frequency range by using the
waveband selector
BAND
k .
• Now select the desired radio station by turning
the
TUNING
regulator l .
IB_KH2187_88_DT49048_LB4 27.04.2010 11:56 Uhr Seite 5