Silvercrest KH 1115, Operating Instructions Manual

Page: 6 / 65

- 4 -
Using the thermal jug
Opening / Closing the lid
➪
To open the thermal jug
0
, turn the lid
9
so
far to the side that the arrow on the lid
9
points
to the symbol . You can now lift the lid
9
upwards.
Risk of personal injury!
Should you want to remove the lid 9 directly after
the brewing process, ensure that you hold the lid 9
so that the hot condensed water, which can collect
on the lid
9 , is not able to run onto your hand. Risk
of scalding!
➪
To close the lid 9 , place it so that the arrow on
the lid 9 points to the symbol . Then turn it
so far back that the arrow on the lid 9 points to
the symbol . The lid 9 is now secured and
cannot fall off.
Pouring coffee
You do not have to remove the lid
9
from the thermal
jug
0
to pour coffee.
➪
With the lid
9
secured, press on the pouring
lever 8 and hold it down. You can now
pour out the coffee.
➪
When you have finished pouring, release the
pouring lever
8 .
Preparing coffee
➪
Swing out the filter holder 4 and insert a filter
bag (Size 1x4) with the sides folded. Put coffee
powder into it (medium to fine ground). For one
cup of coffee you will require about one measuring
spoon
q
of coffee powder. Subject to taste, the
amount of coffee powder can vary.
➪
Fill the water tank 1 with the required amount
of water.
For this, use the scale
3 on the water tank 1 .
Note:
• Never fill it with water for more than 10 large
cups/ 15 small cups. Pay heed to the Max
marking in the water tank. The appliance can
overflow. Before use, check to ensure that the
thermal jug
0 is empty.
• Before every brewing process, rinse the thermal
jug 0 with hot mains water. This will ensure that
the coffee remains hot for longer.
➪
Place the thermal jug 0 in the coffee machine.
➪
Press the switch 7 to start the brewing process.
The red indicator lamp glows.
➪
The coffee maker switches itself off automatically
when the brewing process has ended.
Note:
You cannot stop the brewing process manually.
All of the water that is in the water tank
1
passes
through the coffee maker. Should you wish to stop
the brewing process you must disconnect the plug
6
from the power socket.
➪
You can extract the thermal jug 0 and serve the
coffee when the red indicator light has extinguished.
Tip:
Should you wish to keep the coffee warm in the
thermal jug
0 for an extended period, remove the
thermal jug 0 from the coffee maker when the bre-
wing process is finished. When the thermal jug 0 is
standing in the coffee maker the lid 9 , due to the
brewing mechanism, is pressed down. As soon as
the brewing process is complete, hot air escapes
through the lid
9
. The coffee cools faster. When
the thermal jug
0
is removed from the coffee ma-
ker, the lid
9
closes itself automatically. The coffee
stays hot for longer.
IB_KH1115_RP25671_LB4 03.06.2009 11:31 Uhr Seite 4