Silvercrest IAN 279754, Operating Instructions Manual

Page: 14 / 126

SBTF 10 C3
GB
│ 11 ■
Ɣ
Select the “ Car Kit ” hands-free kit from the list of
available devices on the mobile phone.
Ɣ
Enter the preset pass code “
9999
” and then confirm
this to pair the devices with each other. You will hear
a short, low beep followed by a short, high-pitched
beep and the LED status indicator
flashes every
3 seconds.
Ɣ
Switch off the hands-free kit after successfully pairing
the second mobile phone.
Ɣ
Press and hold the multifunction button for about
3 seconds until you hear a short high-pitched beep. The
LED status indicator
flashes twice every 3 seconds.
The hands-free kit will attempt to make a connection to
the last two connected mobile phones within the next few
seconds. You will hear a double beep once the devices
have been successfully paired.
Note:
In some cases, it will be necessary to make the connection
manually via the
Bluetooth
®
menu on the mobile phone.
Separating the connection
If you wish separate the mobile telephone from the hands-
free appliance, for example, to connect it to another
Bluetooth
®
appliance:
Ɣ Switch the hands-free appliance off
or
Ɣ
separate the connection over the
Bluetooth
®
menu
in the mobile telephone.
Note:
You need not erase the coupling with the hands-free appli-
ance in the
Bluetooth
®
menu to separate the connection.
Using the hands-free appliance
After successful coupling, the following functions are
available to you. Some of the described functions are
only possible with a mobile telephone that supports the
Handsfree Profile (HFP).