■
32
│
GB
SAS 7.4 LI B1
Charging
NOTE
►
Check to ensure that the on/off switch
has been pushed back (to the
position "0") before starting the charging process.
■
Place the handheld vacuum cleaner from above into the wall bracket
so
that the barrel plug
slips into the socket on the handheld vacuum cleaner.
The charge indicator lamp
lights up red and the charging process begins.
■
Important:
The charge indicator lamp
lights up green once the handheld
vacuum cleaner is charged enough to vacuum again. This does not mean that
all the batteries are completely charged. When the charge indicator lamp
lights up green, the batteries are charged to around 80%.
■
When charging is complete, which can take around 5 hours with fully dis-
charged batteries, the appliance automatically switches to a trickle charge
(maintenance function). Nevertheless, in order to avoid possible damage
to the batteries, do not leave the appliance permanently connected to the
mains adapter
.
■
Do not recharge the batteries again until the handheld vacuum cleaner's
suction power becomes appreciably weaker and the charge indicator lamp
flashes green.
NOTE
►
The handheld vacuum cleaner can also be charged directly via the mains
adapter
. To do this, remove the barrel plug
with a slight twist from the
wall bracket
and insert it into the socket on the handheld vacuum cleaner.
Operation
CAUTION!
►
The suction opening must always be open and may not be blocked. Block-
ages lead to overheating and damage to the motor.
NOTICES
►
Make certain that the dust filter
is always inserted before using the appli-
ance.
►
When vacuuming liquid, do not exceed the MAX marking in dirt container
-
.
Summary of Contents for IAN 273028
Page 3: ...4 1 2 q 0 8 7 6 3 5 9 ...
Page 27: ... 24 SAS 7 4 LI B1 ...