Silvercrest IAN 107261, Operation And Safety Notes, Page: 15 / 105

15 GB
Troubleshooting
– If the LC display
5
shows “Err”, there is too much weight
on the appliance. Remove the excess load. Never place a
load of more than 5 kg onto the appliance.
– If the LC display shows “Lo”, the batteries are discharged.
Change the batteries.
Note: The message “Lo” only appears in the weighing
mode.
– If the LC display shows “UNST”, wait for a few seconds.
– If the appliance does not work as expected, change the
batteries.
Note:
The device contains delicate electronic components.
This means that if it is placed near an object that transmits
radio signals, it could cause interference. If the display in-
dicates a problem, move such objects away from it. Elec-
trostatic discharges can lead to malfunctions. In the case
of such malfunctions remove the batteries briefly and then
insert them again.
Cleaning, care and storage
Note: For storage you can hang the appliance using the
hanger
1
(see Fig. A).
Under no circumstances should you use liquids or detergents,
as these will damage the appliance.
The appliance should only be cleaned on the outside with
a soft, dry and lint-free cloth.
For stubborn dirt use a cloth with soapy water or stainless
steel cleaner.