36 US-EN
Press the button 7 on one of the
products which will then by default set it as
the „master“ unit . A beep will sound . When
pairing between both products has been
carried out successfully, the LED 5 of the
connected „slave“ unit stops flashing and a
sequence of beeps will sound .
The „master“ unit LED 5 will still be flashing
waiting to pair with the playback device .
Once the „master unit“ has successfully
paired with the playback device both the
„master“ and „slave“ units can be played
and controlled synchronously during
Bluetooth
®
playback mode .
Press the button 7 again to break the
TWS pairing connection, the LED 5 on the
connected „slave“ unit flashes and a signal
tone sequence sounds .
