Silvercrest HBS 3.7 C1, Operating Instructions Manual

Page: 47 / 197

45
GB
Comb attachments |
2
, |
1
• Remove the comb attachment. Rinse the comb attachment
with water and let it dry before using it again.
Hair trimmer, beard trimmer and precision trim-
mer attachments
|
13
, |
14
, |
4
1. Figure A: remove the attachment from the hair and beard
trimmer | 5 by pressing it with the thumb towards the rear.
2. Remove the hair remnants from the attachment using the
cleaning brush | 17 included in the delivery.
3. Apply a few drops of blade oil | 16 to the cutting edge of the
attachment. Using a soft cloth, wipe off the surplus oil, if
necessary. Only use acid-free oil, such as e.g. sewing ma-
chine oil.
Nose/ear hair trimmer attachment |
12
• Remove the nose/ear hair trimmer attachment | 12 . Rinse it
with water and let it dry completely before using it again.
Shaving attachment |
3
WARNING!
~
Do not detach the shaving foil from the shaving foil frame,
and do not clean it using the cleaning brush
| 17 .
NOTE: from time to time, oil the cutting blade with a few drops
of acid-free oil (e.g. sewing machine oil). Attach the shaving at-
tachment to the hair and beard trimmer
| 5 and let it run for a few
seconds without using it. Using a soft cloth, wipe off the surplus
oil, if necessary.