Silvercrest BABYTALKER 1030, User Manual

Page: 5 / 108

5
Babytalker 1030
ENGLISH
1 Introduction
Thank you for buying the Babytalker 1030, a low-energy baby monitor with a reception range of up to
100 metres. It has no running costs other than the minimal cost of recharging the batteries or buying new
(rechargeable) batteries.
The Babytalker 1030 operates on 8 channels.
2 CE Marking
The CE symbol on the unit, User Guide and packaging indicates that the unit complies with the essential
requirements of the R&TTE Directive 1995/EC.
3 General information
This instruction manual is part of the Babytalker 1030 (hereinafter referred to as "the device").
It contains important information about setting up the monitor, safety aspects, correct use and looking
after the monitor.
The instruction manual must always be kept close by the device.
It must be read and followed by anyone responsible for operating the device, resolving faults and/or
cleaning it.
Keep this instruction manual safely and if you sell the device please give it to the next owner.
3.1 Copyright
This document is protected by copyright.
All rights, including those of total or partial photomechanical reproduction, duplication and distribution by
means of particular processes (such as data processing, data carriers and data networks), and substantive
and technical changes, are reserved.
3.2 Warnings
DANGER
A warning of this hazard level indicates an imminent hazardous situation.
If the hazardous situation is not prevented, this could lead to death or serious injury.
WARNING
A warning of this hazard level indicates a possible hazardous situation.
If the hazardous situation is not prevented, this could lead to injury and/or material damage .
• A note indicates additional information that will make using the device easier .
HL_Babytalker 1030_LB4.book Page 5 Wednesday, March 16, 2011 10:06 PM