■
36
│
GB
│
MT
SEMS 1100 B2
3) Place the sieve holder
i
in the appliance by inserting the “
INSERT”
mark, which is located next to the hot water shower
0
, into the appliance and
then turning it clockwise until the handle of the sieve holder
i
is facing the
front (“
LOCK” mark).
4) Place a cup under the sieve holder
i
.
5) Turn the steam control
2
to “0”.
6) Switch the appliance on with the on/off switch
r
.
7) The red control lamp „Power“
w
lights up. After a short time, the pointer in
the temperature indicator
1
will begin to rise.
8) As soon as the green heating-up control lamp
e
lights up, press the
“Espresso” button
t
. Allow the water to flow for about 1 minute.
NOTE
►
You may need to empty the cup in between. Interrupt the process by
pressing the "Espresso" button
t
. Empty the cup and press the
"Espresso" button
t
again so that water flows through the appliance.
9) After about 1 minute, stop the pump by pressing the “Espresso” button
t
again.
10) Wait until the green heating-up control lamp
e
lights up again. The
warming-up is concluded. You can now prepare espresso.
Heating up before every use
Before you can prepare an espresso or cappuccino, the appliance must be
heated up.
1) Switch the appliance on using the on/off switch
r
. The red control lamp
„Power“
w
lights up. Neither the “Espresso”
t
nor the “Steam”
z
buttons should be pressed in. Ensure that the steam control
2
is turned
towards “0“ as far as possible.
2) Place the sieve holder
i
in the appliance by inserting the “
INSERT”
mark, which is located next to the hot water shower
0
, into the appliance and
then turning it clockwise until the handle of the sieve holder
i
is facing the
front (“
LOCK” mark).
3) Press the “Espresso” button
t
so that the appliance draws water from the
water tank
5
. As soon as water starts exiting the openings in the sieve holder,
press the “Espresso” button
t
again to stop the pump.
4) Wait until the green heating-up control lamp
e
lights up.
5) Press the “Espresso” button
t
again and allow hot water to flow through
for 20 seconds before stopping the pump again.
The preheating process is completed. You can now make an espresso/cappuccino.
