Silvercrest 386427-2110, Short Manual

Page: 9 / 150

■ 6 │
GB
│
IE
SPG 2000 B2
Assembly and setting up
WARNING! RISK OF FIRE!
► Never place the appliance beneath wall
cabinets or adjacent to curtains, wall units
or other flammable objects .
► Set up the appliance at least 70 cm from
any flammable materials (e .g . curtains) .
► Always place the appliance on a heat-resistant
surface .
1) Remove all of the parts from the box and
remove the packaging material and any
protective film .
2) Clean all components as described in the
section "Cleaning and maintenance" . Ensure
that all parts are completely dry .
3) Place the appliance on a clean and level
heat-resistant surface .
4) Insert the plug
9
of the thermostat
3
into the
connection socket
2
. Make sure that the ther-
mostat
3
is pushed in as far as the stop in the
connection socket
2
. Otherwise the appliance
cannot heat up!
Before first use
1) Insert the plug into a mains power socket and
set the temperature control
8
to level 5 .
The appliance heats up .
2) Wait for 10 minutes .
3) Then pull out the plug and allow the appliance
to cool down .
NOTE
► The first time the appliance heats up, a small
amount of smoke and odour may result from
production-related residues . This is normal
and is completely harmless . Ensure sufficient
ventilation; for example, by opening a
window .
4) Wipe the griddle
1
with a damp cloth after it
has cooled down .
5) Clean the drip tray
5
as described in the
section "Cleaning and maintenance" .
6) Make sure that all parts are completely
dry before operating the appliance .
The appliance is now ready for use .
Thermostat settings
The temperature control
8
on the thermostat
3
can be used to set the temperature level .
Level 0
Grill switched off
Level 1 Grill switched on;
low temperature
Level > 1–3 Grill switched on;
medium temperature
Level > 3–5 Grill switched on;
high temperature
Depending on the room temperature, heating up
will start at different positions on the temperature
control
8
.
As soon as you set a temperature level, the control
lamp
7
comes on . Once the set temperature has
been reached, the control lamp
7
goes off .
However, the lamp may come on and go off again
at any time . This means that the appliance is main-
taining the temperature and has heated
up again a little .
NOTE
► Select the correct temperature level by trial
and error . The lower and medium tempera-
ture levels are better suited for vegetables,
fruits and delicate foods . The higher tempera-
ture levels are better for meat .