Silvercrest 368342 2101, Operating Instructions Manual

Page: 19 / 318

SDBSB 3000 A1
■ 16
│
GB
│
IE
–
If the steam control lamp medium
u
lights up, a medium quantity of
steam is produced.
–
If the steam control lamp low
i
lights up, only a small quantity of
steam is produced.
As soon as the steam control lamp
high
z
/
medium
u
/
low
i
(depend-
ing on the setting) lights up constantly, you can start steam ironing.
5) Hold the steam iron in a vertical position and press the steam button
2
(see
fig. 10).
Fig. 10
6) Touch the fabric lightly with the soleplate
8
and steam it to remove creases.
7) Release the steam button
2
to stop producing steam.
Topping up the water
NOTE
► As soon as the water in the water tank
0
is too low, the water tank control
lamp
w
lights up red.
► The water tank control lamp
w
goes out as soon as there is enough water
in the water tank
0
.
1) Put the iron down on the stand
6
on the base station.
2) Refill the water as described in the section Filling the water tank .