10 GB
m
ATTENTION! Ensure that:
–
No foreign objects penetrate the product.
–
When using an optional USB power
supply, its operating instructions are
observed.
In the event of wireless data transmission,
unauthorised third parties receiving the data
cannot be excluded.
Operating system updates
In order to keep the product up to date,
it is necessary that you always keep the
operating system of your smartphone up
to date.
Update the operating system regularly.
z
General information about
this product
z
Waterproofing (IP67)
Resistant to splashes, water and dust
(IEC Standard 60529: IP67 rating)
NOTE:
Waterproofing is not an everlasting
feature, you can wear the product in
everyday life. Washing hands, showers, rain
or similar situations / activities are not harmful
to the product. The product is protected
against short immersion.
z
Before first use
After unpacking the product:
Charge the product (for details please refer to
the “Charging the battery” section).
Charge the product in time. The battery
performance will degrade if the voltage is too
low for a long time.
z
Charging the battery
B
[
5]
[
7]
[
3]
1. Hold the housing
[
3]
with one hand. Hold the
watch strap
[
5]
with the other hand.
2. Pull the housing
[
3]
and the watch strap
[
5]
apart at the
S
USB
mark
[
4]
.
3. Connect the revealed USB plug
[
7]
to a free
USB port.
4. When the battery is fully charged: Disconnect
the USB plug
[
7]
from the USB port.
5. Connect the USB plug
[
7]
to the watch
strap
[
5]
.
NOTES:
Make sure that the contacts of the USB
plug
[
7]
correctly engage with the contacts in
the USB port. If the product does not charge,
turn the USB plug 180° and plug it into the
USB port again.
The product turns on automatically as soon as
it is connected with the USB port.
The product cannot be operated during
charging.
The charging status is shown in the
display
[
2]
.
A charging cycle with a charging current of
approx. 85 mA takes approx. 1.5 hours.
