■
10
│
GB
│
IE
SKHK 40 C1
Handling and operation
Switching the headphones on/off
♦
Press the
button
5
for about 2 seconds to switch on the head-
phones. You will hear a beep and the operating/charging LED
0
lights
up violet for approx. 2 seconds. The operating/charging LED
0
then
flashes alternately orange and blue.
The headphones are now in pairing mode.
♦
To switch off the headphones, press the
button
5
again for about
2 seconds until you hear a beep and the operating/charging LED
0
goes out.
Wearing the headphones
♦
When putting the headphones on, please note the markings “
R
” (right)
and “
L
” (left) on the inside of the adjustable head band
1
.
♦
Adjust the headband
1
so that it fits your head comfortably and the
earpieces
2
cover your ears.
Pairing/unpairing the headphones with a
Bluetooth
®
device
Before you can use the headphones with the
Bluetooth
®
function, you must pair
them with a compatible
Bluetooth
®
device.
♦
Switch on the headphones as described above to activate pairing mode.
♦
Set the
Bluetooth
®
playback device so that it scans for
Bluetooth
®
devices. A detailed description of how to do this can be found in the
operating manual for your
Bluetooth
®
playback device.
♦
Select the entry
SKHK 40 C1
from the list of devices found on your
Bluetooth
®
playback device and, if required, enter the code
0000
to
connect the two devices. If the pairing is successful, you will hear a rising
series of beeps and the operating/charging LED
0
flashes blue twice at
3-second intervals.
♦
To terminate the
Bluetooth
®
connection, either disable the
Bluetooth
®
function on the
Bluetooth
®
playback device or hold down the
Bluetooth
®
pairing button
7
for about 2 seconds until the operat-
ing/charging LED
0
flashes orange and blue alternately. The headphones
are now in pairing mode again.
♦
Alternatively, switch the headphones off as described above to deacti-
vate the
Bluetooth
®
function.
