Silvercrest 353618 2010, Quick Manual

Page: 11 / 104

■ 8 │
GB
│
IE
SAS 7.4 LI B3
Information about the batteries
1) This handheld vacuum cleaner is powered by rechargeable lithium-ion batteries.
2) For care of the batteries, we recommend the following: Once the batteries
have been charged, disconnect the mains adapter
4
from the mains socket.
Do not reconnect the mains adapter
4
with the mains socket until the hand-
held vacuum cleaner’s suction power has noticeably decreased.
Installation of the wall bracket
DANGER – ELECTRIC SHOCK!
► Ensure that there are no power cables or other conduits or pipes in the wall
at the location where you intend to bore the holes for the wall bracket
3
.
Drilling into a current-carrying electric cable can be potentially fatal!
1) Place the barrel plug
5
of the mains adapter
4
into the wall bracket
3
as
shown in the diagram. Secure the barrel plug
5
by turning it.
2) Select a suitable installation location for the wall bracket
3
:
It must be possible to remove the handheld vacuum cleaner easily and there
must be an accessible mains power socket for the mains adapter
4
.
3) Drill two holes about 61 mm apart. Use the wall bracket
3
to mark the
holes, to ensure the correct spacing. The drill holes must be suitable for 5 mm
wall plugs.
4) Push the wall plugs r into the holes and then screw the wall bracket 3
firmly into place using the screws
e
.
5) You can place the nozzles on the accessories holder on the side.
6) Connect the mains adapter
4
to a mains power socket.
IB_353618_SAS7.4LIB3_LB8-short.indb 8 IB_353618_SAS7.4LIB3_LB8-short.indb 8 22.01.2021 12:09:33 22.01.2021 12:09:33