Silvercrest 353244 2007, Operating Instructions Manual

Page: 11 / 72

■ 8
│
GB
│
IE
│
NI
SSSES 1.5 B2
NOTE
► During filling pay attention to the marking max
0
on
the soap tank
8
. Never fill the soap tank
8
above the
marking max
0
. Otherwise the soap tank
8
will over-
flow.
6. Place the soap tank latch
9
back onto the soap tank
8
and turn the soap tank latch
9
clockwise until it locks into
place. Shake the soap tank
8
a few times to mix the water
and liquid soap.
7. Place the main appliance
7
back onto the soap tank
8
.
Then turn the soap tank
8
clockwise until it is sitting tight
and secure on the main appliance
7
. The appliance is
now ready for use.
Operation
1. Flip up the control panel cover
1
on top of the appliance.
Press and hold the On/Off button
3
for approx. 5 sec-
onds. The green LED
u
lights up for approx. 3 seconds.
2. Briefly press the soap quantity button
z
. The green LED
u
lights up once briefly.
For a larger soap quantity press the soap quantity button
z
briefly one more time. The green LED
u
lights up briefly twice.
3. Hold your hand underneath the soap dispenser
5
. The
sensor
6
activates and the appliance begins to dispense
soap.
4. As soon as the soap dispenser
5
stops, you can remove
your hand.
NOTE
► The soap dispenser
5
also stops as soon as you remove
your hand. This is true even if the programmed quantity has
not yet been dispensed.
5. If you do not intend on using the appliance for an extended
period of time, press the On/Off button
3
for approx.
5 seconds to switch off the appliance. The red LED
2
lights
up for approx. 3 seconds.
NOTE
► If the appliance has not been used for a few days it may be
necessary to operate the soap dispenser
5
a few times in
succession before the appliance will dispense any soap.
IB_353244_SSSES1.5B2_LB6.indb 8 11.01.2021 14:48:51