SED 3.7 G3
GB
│
IE
│
13
■
Epilation
If the body parts to be epilated are prepared:
1) Rub your hand once more against the growth direction of the
hairs to be removed. Through this the hairs will be raised so that
they can be better captured by the tweezers.
2) Remove the protective cap
1
from the epilator head
2
.
3) If necessary, fit the massage roller attachment
9
onto the epilator
head
2
. The massage rollers stimulate the skin and thus ensure
a gentler epilation experience.
4) Press the travel lock
4
and slide the speed switch
5
upwards
to the desired speed level:
―
Level 1: for sensitive areas (armpits and bikini line)
―
Level 2: for legs
During operation, the LED light
8
illuminates the skin area being
depilated.
5) Hold the skin tight with one hand.
6) Place the epilator perpendicular to the skin and, without exerting
any pressure, move it
against
the direction of the hair growth.
Thereby, the side with the speed switch
5
must face towards you.
Do not make back and forth or circular movements.
Always start anew and pass over the body part to be epilated
several times, so that all of the hair is removed.
NOTICE
►
It may be that the hair grows back after a few days. The reason
for this is that these hairs were too short to be removed during
the last epilation session.
Summary of Contents for 353054_2007
Page 3: ... 8 9 0 2 3 4 5 6 1 7 A B q w ...
Page 95: ...SED 3 7 G3 92 NL BE ...
Page 137: ...SED 3 7 G3 134 PL ...
Page 157: ...SED 3 7 G3 154 SK ...
