Silvercrest 339195 1910, Operating Instructions Manual

Page: 12 / 58

GB
│
IE
│
NI
│
CY
│ 9 ■ SSMC 600 B1
Removing the blender
If you want to remove the blender
3
from the motor block
6
:
1) Always start by setting switch
5
to the off position (“0”) and pulling out the
mains plug.
2) Wait until the motor has come to a complete standstill before lifting the
blender
3
off the motor block
6
. Remove the blender
3
from the motor
block
6
in a vertical, upward motion.
Useful tips
■ To achieve the best results when puréeing firm ingredients, add small amounts
one after the other into the blender
3
rather than a single large portion.
■ When processing firm ingredients, cut them into small pieces (2 – 3 cm).
■ Add thicker ingredients (such as yoghurt) into the blender
3
first. If any of
ingredients are not picked up during mixing, remove the blender
3
from the
motor block
6
, remove the lid
2
and stir the ingredients with a suitable
implement, such as a spoon. Replace the blender
3
back on the motor block
6
with the lid
2
closed and continue mixing.
■ When mixing liquid ingredients, start off with a small amount of liquid.
Gradually add more liquids to the mixture through the measuring cap.
■ The appliance can be stabilised by placing your hand on top of the closed
blender during operation.
■ When stirring firm or very viscous foods, it can be helpful to use the level
P
to
avoid a blocking of the cutting blades
4
.
NOTE
► Do not use the appliance to grind crystals of cooking salt, refined sugar or
white sugar. For example, to make powdered sugar.
IB_339195_SSMC600B1_GB_IE_NI_CY.indb 9 07.02.2020 09:11:44