
GB│IE
│
19
■
STK 650 B2
4) Remove the brewing system and pull the riser pipe
q
with the sieve
w
upwards.
5) Add the desired quantity of tea or teabags to the brewing chamber
0
.
NOTE
►
Ensure that no tags or bag threads remain in the device.
6) Replace the brewing system in the jug
3
. Ensure that the riser pipe
q
fits
into the recess on the floor of the jug
3
. The brewing chamber
0
must be
inserted with the recess facing towards the handle
2
.
7) Close the lid
1
.
8) Replace the jug
3
on the base
5
.
9) Insert the mains plug into a mains power socket and set the On/Off switch
8
to the position "I". The control lamp
4
and the On/Off switch
8
light up.
The water is now boiled, pressed upwards through the riser pipe
q
and flows
through the brewing chamber
0
back into the jug
3
.
After the water is boiled, the appliance switches to the keep-warm function. The
control lamp
4
goes out. Only the On/Off switch
8
remains lit up. As soon as
the water cools down, the tea maker boils it again. The control lamp
4
lights up
again during the boiling process.
NOTE
►
As the water is fed back through the brewing system when it is re-boiled,
remove the brewing system from the jug
3
after the first brew.
WARNING! RISK OF INJURY!
►
The brewing system is very hot! There is a risk of burns! Use oven gloves
when you touch the brewing system.
NOTE
►
The longer you keep the drink warm and the more liquid evaporates, the
stronger the drink will become. We therefore recommend drinking the tea
as quickly as possible after it is initially brewed.
■
You can interrupt the boiling process at any time. To do this, set the On/Off
switch
8
to the "0" position. The boiling process stops.
■
Once you remove the jug
3
from the base
5
the boiling process stops.
CAUTION! PROPERTY DAMAGE!
►
Always allow the jug
3
to cool down before refilling it with cold water for
another brewing cycle. Otherwise, excessive tension in the glass could
cause the jug
3
to break.
IB_337246_STK650B2_LB8.indb 19
06.05.2020 09:00:13
Summary of Contents for 337246 2001
Page 3: ......