66 GB
9. Operation
DANGER of burns!
~
During operation, the surfaces of the de-
vice may become hot. Do not touch any
hot parts of the device such as the air
outlet
13
on the back.
~
Use oven gloves or potholders to touch
the pan
10
and frying basket
5
.
~
During frying, hot steam escapes from
the air outlet
13
. Be careful not to put
your hands into the steam.
~
Do not move or transport the hot air fry-
er while it is switched on.
WARNING! Risk of material damage!
~
The device must not be operated under
any circumstances without the frying
basket
5
!
9.1
Power connection
• When the device is set up, plug the
mains plug
11
into an earthed wall
socket that corresponds to the specifica-
tions on the rating plate. The wall socket
must also be easy to reach after switch-
ing on the device.
- All indications in the touch display
3
light up briefly.
- A double acoustic signal is triggered.
- The symbol for the Start/Stop but-
ton
20
is lit. The device is in stand-
by mode.
9.2
The touch display
On the touch display
3
there are symbols
that only display certain functions, e.g. the
heating symbol
24
.
Other symbols (also) represent a button, e.g.
the Start/Stop button
20
. The term ‘but-
tons’ is used in this instructions for buttons and
keys to make the text easier to read.
9.3
Switching on/off
• Press the Start/Stop button
20
to
switch on the device from standby mode.
- The display
3
shows the program
symbols
14
and the lower bar with
the buttons
18
–
23
.
- The set temperature and cooking time
are displayed alternately.
NOTE:
if you switch off the device with the
Start/Stop button
20
immediately after
switching on, the fan is switched on. It runs
for approx. 1 minute, until the device is
switched to standby mode.
• Press the Menu button
23
repeated-
ly to select the desired program.
• Press the Start/Stop button
20
again
in order to start the device with the select-
ed settings or the selected program.
- The heating symbol
24
is dis-
played.
- The fan symbol
25
flashes.
- The set temperature and cooking time
are displayed alternately.
- The cooking time is counted down.
- The selected program symbol
14
flashes.
• While the device is running, press and
hold the Start/Stop
20
button to stop
the process.
- An acoustic signal sounds.
- The fan continues to run and the fan
symbol
25
flashes.
- After approx. 1 minute the fan stops.
The device is in standby mode. Only
the symbol
20
can be seen in the
display
3
.
__334460_1910_Heissluftfritteuse_B5.book Seite 66 Montag, 20. Juli 2020 12:08 12
