20 GB
4. Items supplied
1 window cleaner
1 cleaning pad
9
1 Power unit
10
1 copy of the user instructions
5. Unpacking
• Remove all packing material.
• Check to ensure that all parts are pres-
ent and undamaged.
6. Charging
NOTES:
• Before the device is used for the first
time, and during the following three
charging procedures, the device should
be charged for 3.5 hours in each case.
• When the battery is almost flat, the
power and charging indicator
7
flashes
red. The device can then only be used
for a short time without being connected
to the electricity supply.
• When the battery is fully charged, the
device can be used for approx.
35 minutes without being connected to
the power supply.
• It is best to charge the window cleaner
after each use before putting it away.
This saves the battery and the window
cleaner is immediately ready for use the
next time you need it.
1. Switch off the device with the on/off
switch
6
if necessary.
2. Connect the power unit
10
to the con-
nector
3
on the back of the handle
2
of
the device.
3. Insert the power unit
10
into a readily
accessible wall socket whose voltage
matches the voltage stated on the pow-
er unit. The power and charging indi-
cator
7
is lit red and the battery is
charged.
4. When the battery is fully charged, the
power and charging indicator
7
is lit
green. Disconnect the power unit
10
from the wall socket and then the coax-
ial power connector from the connec-
tor
3
.
7. Operation
Attaching the cleaning pad
The cleaning pad
9
has two different sides:
-
Figure A:
the side with the mesh struc-
ture is the cleaning side.
-
Figure B:
the other side (Velcro side) is
attached to the Velcro points
13
on the
sole
8
.
• Attach the Velcro side of the cleaning
pad
9
to the Velcro points
13
.
Filling the water tank
DANGER! Risk of electric
shock due to moisture!
~
Pull the power unit
10
out of the wall
socket before you fill the water tank.
WARNING! Risk of material dam-
age!
~
Only fill the water tank
11
with cold,
clear tap water. Do not use chemical
substances, cleaning agents or other liq-
uids. Single exception: you can use a
few drops (1 to 3) of mild detergent or
glass cleaner concentrate (to dissolve in
the cleaning water).
~
Do not use abrasive or harsh cleaning
agents with the window cleaner.
1.
Figure D:
open the lid
1
.
2. Fill cold, clear tap water through the fill-
ing opening
15
at most up to the
MAX
mark
12
.
3. If desired, add 1 to 3 drops of mild de-
tergent or glass cleaner concentrate to
the water.
4.
Figure D:
close the lid
1
and press it
firmly closed.
__334427_Fensterreiniger_B8.book Seite 20 Dienstag, 5. Mai 2020 1:33 13
Summary of Contents for 334427 1910
Page 17: ...15 DE __334427_Fensterreiniger_B8 book Seite 15 Dienstag 5 Mai 2020 1 33 13 ...
Page 59: ...57 NL __334427_Fensterreiniger_B8 book Seite 57 Dienstag 5 Mai 2020 1 33 13 ...
Page 73: ...71 PL __334427_Fensterreiniger_B8 book Seite 71 Dienstag 5 Mai 2020 1 33 13 ...
Page 85: ...83 CZ __334427_Fensterreiniger_B8 book Seite 83 Dienstag 5 Mai 2020 1 33 13 ...