Silvercrest 331472 1907, Assembly, Operating And Safety Instructions

Page: 21 / 74

21 GB/IE
Adjusting the product
Adjusting the height
Loosen the height adjustment ring
12
by turning
it anticlockwise.
Move the internal pole
11
up or down and set
the desired height.
Once you have set the desired height, secure
the height adjustment ring
12
. Turn it clockwise
by hand to do so.
Adjusting the angle
Gently tilt the motor
9
forward or backward
to achieve the desired angle.
Note: The tilt angle is 25 °.
Adjusting oscillation
Push the oscillation switch
8
down to make
the motor
9
turn left and right.
Note:
The motor
9
oscillates independently
in a range of 85°.
Push the oscillation switch
8
upwards to stop
the motor
9
from turning left and right.
Operation
Operation via control panel
Press the ON / SPEED button
20
, to switch on
the product.
With the product switched on, repeatedly press
the ON/ SPEED button
20
, to choose between
the speed settings LOW (low), MID (medium)
und HIGH (fast).
Note:
An illuminated LED on the operating
panel
18
indicates the selected speed.
Push the OFF button
21
to switch the pr oduct off.
Operation via remote control
Push the ON- / SPEED button
24
to switch the
product on.
With the product switched on, repeatedly press
the ON / SPEED button
24
to switch between
speed levels.
When the product is switched on, repeatedly
press the MODE button
26
, to choose between
three fan modes (automatic, natural, sleep).
An LED in the control panel
18
indicates the
selected mode.
Red=
Automatic (continuous operation at the
selected speed level)
Green =
Natural (continuous operation with
regularly changing speed levels)
Off =
Sleep (continuous operation with decreasing
speed level)
With the product switched on, push the TIMER
button
25
to set a time after which the product
shuts off on its own. The selected time can be
increased by pushing the TIMER button
25
re-
peatedly. The set time is indicated by the illumi-
nated LEDs on the control panel
18
. The
shortest timer is 0.5 hours, the longest 7.5 hours.
Note:
The timer can be exclusively adjusted
via the remote control.
Note:
You can add times by pressing the
TIMER button
25
multiple times.
Programme
There are multiple programmes available which en-
able you to choose custom settings for the product:
1) Simple sleep mode
Set the strength at which you would like the product
to start (HIGH (fast) / MID (medium) / LOW (slow)).
The NATURAL function will be used in this instance.
After each 30 minute interval, the speed reduces to
the next slowest level, until the product continues to
run at „LOW“ strength.