Silvercrest 331378 1910, Operation And Safety Notes

Page: 27 / 102

27 GB/IE
During cleaning, press the Spot mode button
on the robot vacuum cleaner
14
or the remote
control
29
to start this mode.
As soon as the surface is sufficiently clean, the
product continues with the automatic cleaning
programme.
Spot mode can also be started from Standby
mode. Press the CLEAN button on the robot
vacuum cleaner
11
or on the remote control
27
.
Then press the Spot mode button on the robot
vacuum cleaner
14
or on the remote control
29
.
After the cleaning programme has ended in
Spot mode, the product will return to Standby
mode.
Note: You can also end Spot mode by press-
ing the CLEAN button once on the robot vacuum
cleaner
11
or on the remote control
27
.
Note: By pressing the CLEAN button again
on the robot vacuum cleaner
11
or the remote
control
27
, the product will return to the original
cleaning mode.
Note: If the product is in Standby mode and
is approx. 30 cm away from the charging dock
2
, it will automatically return to the charging
dock
2
.
Corner mode
This mode is suitable for cleaning the corners and
edges of a room. In Corner mode, the product follows
a barrier (for example a wall).
During cleaning, press the Corner mode button
28
on the remote control to start this mode.
As soon as the surface is sufficiently clean, the
product continues with the automatic cleaning
programme.
Corner mode can also be started from Standby
mode. Press the Clean button on the robot vac-
uum cleaner
11
or on the remote control
27
.
Then press the Corner mode button
28
on the
remote control. After the cleaning programme
has ended in Corner mode, the product will
return to Standby mode.
Note: You can end Corner mode by pressing
the CLEAN button once on the robot vacuum
cleaner
11
or on the remote control
27
.
Note: By pressing the CLEAN button again
on the robot vacuum cleaner
11
or the remote
control
27
, the product will return to the original
cleaning mode.
Note: If the robot vacuum cleaner is in Standby
mode and approx. 30 cm away from the charg-
ing dock
2
, it will automatically return to the
charging dock
2
.
MAX mode
This mode is suitable if the floor is very dirty or dusty.
Whilst the product is cleaning in Auto or Corner
mode, press the “MAX mode“ button
26 a
on the remote control. The suction power will
increase.
Press the “MAX mode“ button
26 a
again to
switch to the current mode with normal suction.
Return mode
Use this mode to return the product to the charging
dock
2
.
Note: The robot vacuum cleaner automatically
returns to the charging dock
2
when the battery
is low.
Press the “Return mode“ button on the robot
vacuum cleaner
13
or the remote control
25
to
return the robot vacuum cleaner to the charging
dock
2
.
Time-delayed cleaning /
fixed time
Using this function, you can set a time period, after
which the product will begin cleaning. Smallest time
period: 15 minutes, largest time period: 23 hours
and 45 minutes.
Press the CLEAN button on the robot vacuum
cleaner
11
or on the remote control
27
(if no
notification is visible in the display
1
).
Press the Set schedule button on the robot vac-
uum cleaner
12
or the remote control
30
. The
last two digits in the display
1
will flash.
Using the Return mode
13
and Spot mode
14
buttons on the robot vacuum cleaner, set the
desired time in minutes (00, 15, 30, 45). To do