Silvercrest 327263_1904, Operating Instructions And Safety Instructions

Page: 11 / 52

■ 8 │
GB
│
IE
│
NI
│
CY
SAS 7.4 LI D3
Information on the charge indicator lamp
The charge indicator lamp
7
supplies the following information:
The charge indicator light
7
… Meaning
Lights up red the batteries are charging .
Flashing green
the batteries are low and should be
charged soon .
Flashing alternately green/red
the batteries are completely discharged
and should be charged .
Lights up green
the batteries are fully charged .
the appliance is in operation .
Installation of the wall bracket
DANGER – ELECTRIC SHOCK!
► Ensure that there are no power cables or other conduits or pipes in the wall
at the location where you intend to bore the holes for the wall bracket
3
.
Drilling into a current-carrying electric cable can be potentially fatal!
1) Insert the barrel plug
5
on the mains adapter
4
into the wall bracket
3
as shown in the following diagram:
First, feed the cable through the cable routing and then push the barrel plug
5
into the opening in the wall bracket
3
so that it is firmly in place . Secure the
barrel plug
5
by turning it .
2) Select a suitable installation location for the wall bracket
3
:
It must be possible to remove the handheld vacuum cleaner easily and there
must be an accessible mains power socket for the mains adapter
4
.
3) Drill two holes about 60 mm apart . Use the wall bracket
3
to mark the
holes, to ensure the correct spacing . The drill holes must be suitable for 6 mm
wall plugs .