34
GB
12. Using the grater and cutting
disc
Application area:
The coarse grater and cutting disc
4
and the fine grater
and cutting disc
5
are suitable for grating and cutting slic-
es of vegetables, fruit, potatoes and cheese. Both sides of
these discs can be used. On the one side for grating and
on the other side for cutting slices.
Both discs are marked with a pattern for orientation.
WARNING! Risk of material damage!
~
Do not exert too much pressure on the grater or cutting
disc
5
/
4
. Apply an even pressure so that the motor
does not become blocked.
Processing table - cutting:
Processing table - grating:
WARNING! Risk of material damage!
~
Do not operate the device continuously with the grater
and cutting disc
5
or
4
in place for more than
2 minutes. After this, the device must remain switched
off until it has cooled down to room temperature.
Required accessories:
-
Working container
9
-
Axle
17
-
Fine grater and cutting disc
5
or
coarse grater and cutting disc
4
-
Lid
3
with food pushers
1
,
2
And this is how it works:
(For assembly see
Figure J
)
1.
Position the working container
9
on the base unit
13
.
Turn the working container slightly in a clockwise di-
rection until it is heard to lock into place.
2.
Place the axle
17
into the working container
9
.
3.
Position the grater and cutting disc
5
or
4
on the axle
in such a way that the tool with which you want to
work is positioned on top.
4.
Place the lid
3
with the food pushers
1
,
2
onto the
working container
9
. Turn the lid slightly in a clock-
wise direction until it is heard to lock into place.
5.
Connect the mains plug
10
to a wall socket.
6.
Remove the midi food pusher
1
and fill the prepared
ingredients into the food chute.
7.
Turn the dial
12
to position
1
(grating) or
2
(cutting)
and use the midi food pusher
1
to press the ingredi-
ents down with a light, even pressure. Ingredients
with a long shape, such as carrots, courgettes, cu-
cumbers can be pressed downward without a food
pusher if they protrude from the top of the food chute.
8.
Stop (dial
12
in the position
0
) before all of the in-
gredients in the food chute are processed so that you
can fill in more ingredients.
9.
Process all ingredients portion by portion. Empty the
working container
9
from time to time if it is filled up
to the
MAX
mark.
10. When the process is completed, switch the dial
12
to
0
and pull out the mains plug
10
.
11. Turn the lid
3
slightly in an anticlockwise direction
and remove it.
12. Turn the working container
9
slightly in an anticlock-
wise direction and remove it.
13. Hold the axle
17
at the top end and lift it out with the
grater and cutting disc
5
or
4
.
14. Remove the processed ingredients from the working
container
9
.
15. Clean all of the accessories that have been used im-
mediately if possible.
Pattern
Grater and cutting disc
Coarse grater and cutting disc
4
Fine grater and cutting disc
5
Ingredients
max. quantity
max.
processing time
Switch
Carrots
500 g
approx. 2 min.
2
Courgettes
500 g
approx. 2 min.
2
Leeks
500 g
approx. 2 min.
2
Beetroots
(peeled)
500 g
approx. 2 min.
2
Ingredients
max. quantity
max.
processing time
Switch
Carrots
500 g
approx. 2 min.
1
Cutting
Grating
__326488_Kuechenmaschine Multi_B8.book Seite 34 Dienstag, 6. August 2019 10:40 10
