34 GB/IE
Clearing paired devices
In paired mode (the LED will briefly flash white twice every 3 seconds),
press and hold button
8
for 2 seconds and acoustic signal sounds.
The headphones is now in pairing mode. The LED
4
flashes red and white.
Simultaneously pressing and holding button
8
and button
6
for
approx. 2 seconds and two beeps sound.
The memory in the headphones is cleared and it will not auto-connected to
the previous paired communication device.
Connecting the headphones through audio cable
Insert the 3.5 mm jack plug at one end of audio cable
13
to 3.5 mm socket
10
.
Insert the 3.5 mm jack plug at other end of audio cable
13
to 3.5 mm socket
of your playback device.
The headphone will be auto power off if it has been power on before and
the LED
4
light off.
Start a playlist on your playback device. You can only adjust the music
volume on the playback device.
Putting on the headphones
The headphones can be adjusted to your head size, if necessary:
The speakers
2
are secured to the band
1
with a metal rail for this purpose.
Adjust these to ensure optimal comfort.
Please follow the marking “L“ (= left) and “R“ (= right). Put on the headphones
so the control panel
3
is on the right.
Headphones button functions for music playback
Start a playlist on the playback device and set the volume to the minimum
level to begin with. Choose a comfortable volume after putting on the
Summary of Contents for 322177 1901
Page 4: ......
