HP-004B
Bluetooth Headphone
Users Manual
Connect the cable with the charger(or the USB
port on the computer), and insert the other end
MICO-USB to the headphone.
When the headphone is charged, the red indicator
light at the right will be in constant-on state, and
when it is fully charged, the indicator light will turn
off.
3. Bluetooth Handsfree
(1). Answer a call: the headphone has reminder
ring: short press( )to answer the call. If you want
to switch to the mobile phone to answer the call,
just long press( )for 3 seconds;
(2)
.
Short press ( ) again to hang up; long
press( )for 3 seconds to reject the call;
(3). Making a call: dial the number on the mobile
phone, short press( )to hang up, double click
( )to call back.
4. Bluetooth Pairing
Users can make the first connection by searching
and pairing the headphone directly. If you need to
connect the headphone to another mobile phone,
please disconnect the present mobile phone first.
Turn the headphone on, and its bluetooth is
activated automatically: turn the mobile phone
bluetooth on and it will enter into search mode.
Connect the mobile phone to the headphone after
the bluetooth headphone is found.
Confirm to pair and wait for 3-5 seconds, and
when the indicator light flashes slowly for 5
seconds, the pairing is done successfully.
2. Play Music by Bluetooth
Enter the play mode of the mobile phone, short
press( ) to play/pause the music synchronical-
ly; short press( ) to play the previous song
synchronically, and long press it to reduce
volume(VOL-), short press( )to play next song
synchronically, and long press it to increase
volume(VOL+)
.
1.Bluetooth Connection
Charging
Charging Voltage: DC-5.0V
Battery Working Voltage: 3.3-4.2V
Charging Current: 120-250MA
Battery Capacity: 350MAH
Standby Time: 8-9H
Power Consumption: working current:45mA,
play/pause current:32mA
Frequency Range: 20-18KHZ
Product Parameters
Turn the headphone on, and it will enter into
default bluetooth mode and the indicator light will
flash. After the light flashes quickly for 4 seconds,
the headphone is under pairing mode.
After paired, the light will flash slowly and it is ok
to play music. Press play/pause( ), the
constant-on light indicates that the music is
paused. Short press( ) to play the previous
song, and long press( ) to reduce volume
( VOL- ); short press ( ) to play the next song,
and long press( )to increase volume(VOL+).
Audio input is with 3.5mm plug.
Product Introduction
Bluetooth Connection
Please visit Marvo official website to get more
information about our latest products and other
information.
www.marvo-tech.com
Thanks for choosing our Marvo product!
KINDLY REMINDER
Solutions to the conditions in which the device
cannot be recognized, with no functions or
dysfunctions.
Check whether the headphone works well; check
the power, check whether it is paired correctly,
whether the settings are correct; disconnect the
headphone and make a new connection.
If the suggestions above cannot solve the
problems, please contact the local dealer!
Abnormal Occurrences
www.marvo-tech.com
Tel:+86-755-27496655
Fax:+86-755-27497699
s play/paus
dicates tha
Shenzhen Mark Trading Co.,Ltd
