English
- 9 -
Volume Setting
Touch the
•
“
”
or
“
”buttons
buttons to
increase or decrease volume. A volume level scale
(slider) will be displayed on the screen.
Programme Selection
Touch the “
•
P/CH
” oder “
P/CH
” buttons to change
channel. Touch the “
P/CH
” button to select the
next programme or the “
P/CH
” button to select the
previous programme.
AV Mode
Touch the “
•
TVAV
” button. The source OSD will be
displayed in a few second. By repeatedly touching the
“TV / AV” button or by touching the “
P/CH
” oder “
P/CH
” button, you could jump through the available sources.
NOTE:
If you jumped to the desired source, the
device will switch automatically with a short delay to
the source.
Operation with the Remote Control
The remote control of your TV is designed to control
•
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
Volume Setting
Press “
•
V+
” button to increase the volume. Press “
V-”
button to decrease the volume. A volume level scale
(slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
Press “
•
P -
” but ton t o select the prev ious
programme.
Press “
•
P +
” button to select the next programme.
Programme Selection (Direct Access)
Press numeric buttons on the remote control to select
•
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
directly, press the numeric buttons consecutively.
When the pressing time is due for the second
numeric button, only the rst digit programme will
be displayed. Press directly the programme number
to reselect single digit programmes.
First Time Installation
IMPORTANT: Ensure that the aerial is connected
before switching on the TV for the first time
installation.
When the TV is operated for the rst time, installation
•
wizard will guide you through the process. First,
language selection screen will be displayed:
Use “
•
” or “
” buttons to select your language
and press
OK
button to set selected language and
continue.
After selecting the language, “
•
Welcome!
” screen will
be displayed, requiring you to set
Country,Teletext
Language
and
Scan Encrypted
options.
By pressing “
•
” or “ ” button, select the
country
you want to set and press “
” button to highlight
Teletext Language
option. Use “ ” or “ ” button
to select desired Teletext Language.
Press “
•
” button after setting Teletext Language
option.
Scan Encrypted
will be then highlighted.
You can set
Scan Encrypted
as
Yes
if you want to
scan coded stations.
Press
•
OK
button on the remote control to continue
and the following message will be displayed on the
screen:
56966-LCD-TV-32111-DVB_T-GB-1241110_10071112_50179828.indd 9
24.11.2010 14:59:22
