Silvercrest 315311, Operating Instructions Manual

Page: 10 / 40

SDBS 2800 A1
GB
│
IE
│
NI
│
CY
│ 7 ■
Plugging in and ironing
Dry ironing without steam is possible at all
temperatures, steam ironing is only possible in the
red setting range
on the temperature control
6
.
■ Insert the plug into a mains socket .
CAUTION! PROPERTY DAMAGE!
► If the clothing care instructions forbid ironing,
(
symbol), the clothing item may not be
ironed . Ignoring this warning could lead to
permanent damage to the clothing item .
■ Check the care instructions on the labels in
garments to see if they are suitable for ironing,
and at which temperature setting .
Tempera-
ture control
symbol
6
Type of
material
Control
lamp
Type of
material
0
MIN
The appliance does
not heat up
Nylon,
acrylic, rayon
NYLON
Silk, wool,
polyester mix
fabrics
SILK/WOOL
Cotton,
viscose
COTTON
MAX Linen
LINEN
■ Select the appropriate temperature setting using
the temperature control
6
.
NOTE
While it is heating up, always place the iron on
its base
9
.
If you place the iron down on its sole
q
and
do not move it, the automatic switch-off will
be activated after 30 seconds (see chapter
"Automatic switch-off") and the appliance stops
heating .
The control lamp
0
for the set material type starts
flashing . As soon as set temperature has been
reached, the control lamp
0
for the set material
type lights up permanently and you hear a beep .
■ Wait until the control lamp
0
for the set material
type lights up permanently and you hear a
beep . You can start ironing .
■ To dampen the laundry, press the spray button
3
. Water is sprayed from the water jet
1
.
This function is suitable for very dry and heavily
crumpled garments .
Steam ironing
■ Press the steam quantity button
5
repeatedly
until the desired steam quantity is set .
Steam level Type of material
no steam
1
little steam
2 medium steam
3 lots of steam
■ The temperature control
6
must be set to at
least the red setting range . Otherwise no
steam will be produced .