19
GB/IE
Note:
If the product is overloaded, the LCD read-
out
4
indicates “Err” and it will switch off within
3 seconds. Remove food from the product then
press the ON/OFF button
2
to switch on the
product again.
Q
Weigh and add
The product allows you to weigh foods consecu-
tively without removing food already in the weigh-
ing bowl
1
.
Place the weighing bowl
1
on the product.
Press the ON / OFF button
2
to switch the
product on.
Select the unit of weight by pressing the unit of
weight button
5
. You can choose between
“g / kg“ and “oz / lb“.
Place the food you wish to weigh in the weigh-
ing bowl
1
.
The LCD readout
4
indicates the weight of the
food in the selected unit of weight.
Now press the Zero button
6
. The product
now reads “TARE“.
Now place more food in the weighing bowl
1
.
The LCD readout
4
indicates the weight of the
food you have added in the selected unit of weight.
Continue in this way only until the maximum
capacity of the product is reached or the
weighing bowl
1
is full.
Q
Remove part of the
weighed food
Place the weighing bowl
1
on the product.
Press the ON / OFF button
2
to switch the
product on.
Select the unit of weight by pressing the unit of
weight button
5
. You can choose between
“g / kg“ and “oz / lb“.
Place the food you wish to weigh in the
weighing bowl
1
.
The LCD readout
4
indicates the weight of the
food in the selected unit of weight.
Now press the Zero button
6
.
Now remove the required amount of food from
the weighing bowl
1
.
The LCD readout
4
indicates the weight of the
food you have removed as a negative number.
Now press the Zero button
6
. The product
now reads 0 g / 0.0 oz and “TARE” for further
removal / adding food.
Q
Set the countdown timer / alarm
The timer on the product has a time span of 00:10
to 99:50 minutes. The set time is counted down in
reverse to “00:00“. An alarm signal then sounds
and the alarm display “ “
15
flashes.
Press the ON / OFF button
2
to switch the
product on.
Press the Timer button
3
.
Set the required time by pressing the Timer button
“ “
5
, or the Timer button “ “
6
.
Press the Timer button
3
again to confirm the
set time and to start the countdown timer.
Press the Timer button
3
again to stop the
countdown timer.
Press the Timer button
3
again to reset the set
time to “00:00“.
NOTE:
When the set time has elapsed, an alarm
signal sounds.
Press the ON / OFF button
2
to stop the alarm and
at the same time switch off the product.
Q
Display ambient temperature
When the product is switched on, the LCD readout
4
shows the current ambient temperature. This is
indicated by the temperature display
12
in °C.
Q
Switch off the product
The product switches itself off automatically after
90 seconds of inactivity to save energy.
Press the ON / OFF button
2
to switch the
product off manually.
