Silvercrest 290990, Instructions For Use And Safety Notes

Page: 59 / 236

59 GB/IE
Configure the month using the + button. Press the SET
button
6
to confirm.
Configure the day, hour and minute consecutively as
described above. Press the SET
6
button to confirm
each entry.
The
Bluetooth ®
symbol will be shown on the display.
„On“ or „Off“ will flash at the same time.
Using the function buttons „-/+“ choose whether you
want to activate („On“ flashes) or deactivate („Off
flashes“) automatic
Bluetooth ®
data transfer. Press the
SET button
6
to confirm.
If
Bluetooth ®
is activated („On“) data transfer will begin
automatically after the measurement has been taken.
note: The battery life is reduced by transfer via
Bluetooth
®
.
measuring blood pressure
note: To guarantee that you will be able to compare
values adequately, always measure your blood pressure
at the same time of day. Rest for approx. 5 minutes
before every measurement!
If you wish to undertake multiple measurements on the
one person, wait for 5 minutes between taking each
measurement.
You should not eat, drink, smoke or be active in the
30 minutes before each measurement.
Repeat the measurement process if the measured values
seem incorrect.