Silvercrest 290496, Operating Instructions Manual

Page: 11 / 33

■ 8
│
GB│IE│NI SSMN 2 B3
Fitting
1) Place the appliance around your neck so that the massage heads lie on
the sides of the neck. You can use the hand loops to align it.
The control panel with the buttons must be on your right.
In use
Preferably, lie back for the massage and relax. Provide for a relaxing atmosphere.
For example, dim the lights a little.
NOTICE
► Ensure that you experience the massage as comfortable and relaxing.
If needs be, vary the pressure and/or your position. Stop the massage
immediately if it is painful or uncomfortable.
NOTICE
► Never use the appliance for more than 15 minutes. A longer massage
may lead to tension caused by overstimulation of the muscles.
You can select between 2 functions:
–
Shiatsu massage with the massage heads (fast and slow)
–
Warmth (2 of the massage heads illuminate and warm up)
You can combine various massage functions with each other or use them indi-
vidually:
■ Press the "On / Off" button . The massage heads begin with the
slow massage.
■ Press the button "Massage" to increase the massage speed. Press
the button "Massage" once again to stop the massage heads .
■ Press the “Warmth” button , to switch the warmth on. The “Warmth”
button and the massage heads light up. Press the “Warmth” but-
ton again to switch the warmth function off. The light on the massage
heads as well as the button “Warmth” button goes out.
NOTICE
► Once you have switched the warmth function on and the massage heads are
rotating and you then stop the massage heads by pressing “Massage” ,
the warmth function also turns off at the same time. If you want to use the
warmth function again, press the “Warmth” button
to reactivate the
warmth function.