Silvercrest 289848, Operating Instructions And Safety Instructions

Page: 51 / 226

SilverCrest SWE 200 A2
English - 49
If the display (7) indicates a low battery level (30), the batteries are
almost empty. When this happens, immediately replace the batteries with
new batteries of the same type, as empty batteries are subject to leak.
Leaked batteries can damage the device.
WARNING! Remove the batteries if you will not be
using the device for an extended period of time.
7.2 Connecting a mains adapter
Remove the batteries from the battery compartment (20) at the back of the
device if you have previously inserted them. Insert the plug of the mains
adapter into the jack (19) of the world receiver (A). Then insert the mains
adapter into an easily accessible mains socket.
8. First use
8.1 Switching the device on and off
To switch on the device, press the "POWER" button (8) once briefly. When
it is switched on, the display (7) shows the tuned frequency and the
frequency band:
FM
FM band
MW medium wave band
SW
shortwave band
To switch off the device, press the POWER button (8) again. When it is
switched off, the display (7) shows the time that is currently set.