Silvercrest 285991, Operating Instructions Manual

Page: 12 / 78

10 GB
Assembling the ball-bearing ring
1. Figure E: place the ball-bearing ring | 5
into the cone holder | 4 . The balls point
downwards to the cone holder | 4 .
2. Turn the ball-bearing ring | 5 together
with the cone holder | 4 clockwise until it
stops, so that it is screwed on the filler
chute
| 2 .
Dishwasher
The following parts can be cleaned in the
dishwasher:
-
plunger | 1 ,
- filler chute | 2 ,
- cone holder | 4 ( without ball-bearing
ring | 5 ),
- blade cones | 6 and
- bowl | 12
8. Storage
DANGER for children!
~
Keep the device out of the reach of chil-
dren.
DANGER!
~
In order to avoid accidents, the mains
plug
| 13 must never be connected to a
wall socket while in storage.
• Figure F: wind the power cable | 13
around the cable spool | 14 at the un-
derside of the device.
• Select a location where neither high
temperatures nor moisture can affect the
device.
9. Disposal
This product is subject to the
provisions of European Di-
rective 2012/19/EC. The
symbol showing a wheelie
bin crossed through indi-
cates that the product re-
quires separate refuse collection in the
European Union. This applies to the product
and all accessories marked with this symbol.
Products identified with this symbol may not
be discarded with normal household waste,
but must be taken to a collection point for re-
cycling electric and electronic appliances.
Recycling helps to reduce the consumption
of raw materials and protect the environ-
ment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
BB&3(B%ERRN6HLWH0LWWZRFK$SULO