■
82
│
GB
│
MT
SKR 800 B2
Receiving stations in mono
♦
If you would like to receive a station in mono, press and hold the
|
ST/
MO
button for about 2 seconds until
ST
(for stereo display) disappears
from the display .
NOTE
►
ST
is only displayed if the station can actually be received in stereo.
♦
If you would like to switch back to stereo reception, press and hold the
|
ST/MO
button again for around 2 seconds until
ST
appears on
the display.
Kitchen timer
The device has a practical kitchen timer with which you can monitor cooking and
baking times, for example. You can set 2 kitchen timers.
Setting and operating the kitchen timer
♦
Turn the
−TIMER+
dial left or right to set Timer 1. The
display flashes.
NOTE
►
Timer 1 can be set in steps of 5 minutes from 5 minutes up to 3 hours
55 minutes. The time is given as "hh:mm".
►
If no change is made to the setting for about 15 seconds, the device will
switch back to the previous operating mode without saving the settings.
♦
Turn the
−TIMER+
dial to accept the setting. The
display lights up and
the countdown for Timer 1 starts immediately.
♦
Press the
|
Dimmer
button to set Timer 2.
The
display flashes.
NOTE
►
Timer 2 can be set in steps of 1 minute from 1 minute up to 3 hours
59 minutes. If you set the countdown to between 1 minute and 4 minutes,
the time is shown as "mm:ss". If you set the countdown to 5 minutes or
more, the time will be shown as "hh:mm".
►
If no change is made to the setting for about 15 seconds, the device will
switch back to the previous operating mode without saving the settings.
♦
Turn the
−TIMER+
dial to accept the setting. The
display lights up and
the countdown for Timer 2 starts immediately.
♦
The countdown for Timer 1 and Timer 2 gives a warning beep at 30, 15,
10 and 5 seconds before expiry to indicate the alarm time.
♦
At the end of the countdown, an alarm signal with rising volume sounds.
Press the
−TIMER+
or the
−
|
ON/OFF
dial to switch off
the alarm. Timer 1
or Timer 2
goes off.
Summary of Contents for 279238
Page 3: ......
