Silvercrest 277761, Operating Instructions Manual

Page: 88 / 126

SRR 3.7 D5
■ 84
│
GB
│
MT
Cordless shaving
CAUTION! MATERIAL DAMAGE!
► This appliance is not suitable for wet shaving!
This shaver can be used without the power cable. In this case, you
must charge the appliance before initial use (see section “Charging
the rechargeable battery with/without the charger”).
1) Attach the cutting unit
with the connector onto the drive
shaft . Ensure that the connector fits correctly into the
drive shaft and clicks into place.
2) Remove the protective cap
0
.
3) Press the ON/OFF button . The symbol of the battery
charge indicator and the
logo are displayed
as soon as the shaver starts up.
NOTE
► The best results are achieved if used on dry skin.
► It can take 2 to 3 weeks until the skin is accustomed to the dry
shaving system.
4) Move the shaving heads with straight and circular motions
over the skin.
5) After you have covered all the areas you want to shave, press
the ON/OFF button . The appliance stops.
The display disappears at once.
6) Clean the shaver after every use with the supplied brush . .
For a more thorough cleaning, read the section “Cleaning and
care”.