Silvercrest 277031, Assembly Instructions Manual

Page: 8 / 33

■ 6 │
GB
│
CY SMH 30 A1
Step 2: Push the profile rails into the wall bracket
♦ Push the profile rails into the wall bracket (
1.
).
♦ Screw the two locking screws Ø 4 x15 mm
E
into the wall bracket from
below to stop the profile rails from falling out of the wall bracket (
2.
).
♦ Push the two screw covers
F
over the locking screws Ø 4 x15 mm
E
(
3.
).
NOTE
► If you want to use the entire width of the wall bracket, you can leave out
the locking screws Ø 4 x15 mm
E
. Bear in mind that the profile rails will no
longer be secured.
Step 3: Fitting the extension rails
NOTE
The grooves in the profile and extension rails are intended for the placement
of your appliance. Align your appliance as far as possible towards the wall.
This will provide the best hold.
► Measure the distance between the feet of your appliance.
► Align the profile and extension rails according to this.
♦ Push the extension rails into the profile rails, taking into account the distance
you just measured (
1.
).
♦ Ensure that you attach the two locking screws Ø 6 x 20 mm
A
behind the
locking mechanism. This will prevent the extension rails from falling out (
2.
).
E
F