■
2
│
GB
│
CY
SMH 30 A1
Introduction
Information about these assembly instructions
Congratulations! You have purchased a high-quality product. Familiarise yourself
with the product before assembly and first use. Please read the following assembly
instructions and safety notes carefully. Use the product only as described and for
the range of applications specified. Retain these instructions for future reference.
Please also pass all associated documents on to any future owner(s).
Intended use
This microwave wall bracket is intended exclusively for mounting microwaves
and electrical appliances with a similar constructions on walls in private, non-
commercial households. The microwave wall bracket is only intended for use
inside buildings.
No liability will be assumed for damage caused by misuse or improper handling,
the use of force or unauthorised modification. The risk shall be borne solely by
the user.
Safety
DANGER! ELECTRIC SHOCK!
►
Ensure that there are no electrical cables, water or gas pipes or other lines
in the wall at the mounting location.
WARNING! RISK OF INJURY!
►
Do not install the product in places under which people might stand.
CAUTION – PROPERTY DAMAGE
►
Note that the supplied wall plugs are only suitable for concrete and brick
walls. If your wall is made of different types of materials or constructed
differently from what is recommended for the installation, purchase suitable
materials from a specialist shop.
►
All of the assembly material supplied must be used.
►
Never use violence or excessive force for assembly. This could damage the
product.
►
Ensure that you do not exceed the maximum permissible load capacity of
the product of 30 kg.
►
After mounting the product, check its stability and operational reliability as
well as that of the mounted load. This check should be repeated at regular
intervals (at least quarterly).
