SNS 45 B4
■
122
│
GB
│
MT
Matching a nail set
Ƈ
Carefully file the transitions from the nail tips
0
to the natural nails with the
Sandpaper file
.
, until they conform to the contour of the natural nail. File
only the nail tips
0
! Do not damage your natural nail.
Ƈ
Carefullly file the sides of the nail with the Sandpaper file
.
until it is straight
and does not exhibit a “wing”.
Ƈ
File the nail tip
0
first with the sandpaper file
.
and then with the sanding
block
. The nail tip
0
should no longer shine.
Ƈ
Repeat this step for each individual nail.
.
Ƈ
Remove the dust from filing with a paper cloth or cellulose pad
3
.
Application of the UV-Gel
Ƈ
Using the brush
, take a small amount of UV Gel
%
and then wipe the
excess on one side of the brush
off on the edge the UV Gel pot.
Ƈ
Apply a thin coating of UV-Gel
%
onto the complete nail. Apply a little more
UV Gel
%
to the lower part of the nail, as hereby is how the offset between
the natural and the artificial nail is created. Furthermore, the transition from
natural to artificial nails is especially sensitive to pressure and knocks, thus
more UV Gel
%
must be applied here.
INFORMATION
►
When you are doing the application do not press too heavily on the brush
,
since the brush
could otherwise cause streaking.
►
Model the first layer of the UV Gel
%
very carefully, as this determines the
future shape of the nail. Model the best possible natural nail shape.
Ƈ
Maintain a distance of about 1 mm from the cuticle during the application.
Summary of Contents for 275423
