GB
│
17
■
SSME 250 A1
Cleaning and care
DANGER –
RISK OF ELECTRICAL SHOCK!
►
Before cleaning the appliance, disconnect
the power plug from the mains power socket!
There is a risk of electric shock!
NEVER immerse the base
in water or
other fluids!
■
It is best to clean the appliance directly after
use. This makes food residues easier to remove.
CAUTION! MATERIAL DAMAGE!
►
Do not use abrasive or aggressive cleaning
materials. These can damage the surface of
the appliance!
■
Wipe the base
with a damp cloth. For stub-
born soiling use a mild detergent on the cloth.
Wipe off any detergent residue using a cloth
moistened with clean water.
■
Clean the blender jug
/
, the blade holder
with blade
, and the lid
/
in warm water
with a little mild detergent. Afterwards, rinse
all parts with clean water so that no detergent
residues remain.
NOTE
If you clean the appliance directly after use, you
can usually achieve sufficiently hygienic cleaning
results for the blender jug
/
and the blade
holder
by using the following alternatives:
►
Large blender jug
: Fill the large blender
jug
with about 500 ml of water and add
a few drops of mild detergent.
Small blender jug
: Fill the small blender
jug
with about 200 ml of water and add
a few drops of mild detergent.
►
Attach the blade holder
and screw both
onto the base
.
►
Activate the "Pulse" function a few times so
that the blade
churns through the water.
►
Afterwards, rinse the blender jug
/
and
the blade holder
with plenty of clear
water to remove all detergent residues.
■
After cleaning, dry all parts thoroughly.
NOTE
►
You can also clean the lid
/
, the blender
jug
/
and the blade holder
in your
dishwasher. If possible, place the parts in the
upper basket and ensure that none of the
parts can get stuck. Otherwise they might
deform.
Storage
■
Store the cleaned appliance in a clean, dust-free
and dry place.
■
You can coil up the cable and fasten it using the
supplied cable clip
.
