Silvercrest 270671, Operating Instructions Manual

Page: 9 / 75

■ 6
│
GB
│
IE
SLS 3 A1
Inserting/replacing the batteries
NOTE
► Always use 1.5 V, AAA type batteries.
► Pay attention to the correct polarity when inserting the batteries .
1) Turn the lock a quarter turn.
2) Now pull off the battery compartment cover together with the lock .
3) If inserted: Remove the discharged batteries from the battery compartment .
4) Insert new batteries as shown in the polarity diagram in the battery com-
partment .
5) Push the battery compartment cover back onto the appliance and turn the
lock back.
The battery compartment is now closed.
Shaving
NOTE
► If your skin is sensitive or prone to allergic skin reactions, try the shaver first
on a small, unobtrusive area.
1) Ensure the shaver unit is attached and locked in place.
2) Press the travel lock, which is located on the on/off switch and push the
on/off switch towards the shaver unit .
The appliance starts.
The travel lock ensures that the appliance does not start up accidentally, for
example, when stowed away.
NOTE
► Before dry shaving, ensure that your skin is free of cream or oil residue.
Your skin should be clean and dry.
3) Hold the shaver perpendicular to the skin and guide the shaver unit in
straight movements against the direction of hair growth. Apply repeatedly.
The small rubber lip in front of the shaving head
ensures that the skin is
pulled tight and also causes the hairs to stand upright a little.
4) After you have covered all the areas you want to shave, push the on/off
switch back into its initial position. The appliance stops.
5) Clean the shaver after every use with the supplied cleaning brush .
For a more thorough cleaning, read the section "Cleaning, care and mainte-
nance".