10 GB
Disposal / Warranty / Service centre / Declaration of conformity
Cleaning and Care / Storage / Troubleshooting / Disposal
Therefore regularly descale the glass kettle (varies
by lime content in the water and frequency of use).
Only use citric acid or lime dissolver suitable for food
containers from a houseware shop (e.g. coffee maker
cleaner), do not use acetic acid or other acids.
Fill the water reservoir
5
with water and heat
to a simmer.
Add some citric acid or lime dissolver suitable
for food containers from a housewares shop
(e.g. coffee maker cleaner).
Unplug from the protective ground socket. Lime-
scale will dissolve as the water cools.
Occasionally swivel the water reservoir
5
.
Repeat the process for thick layers of limescale.
note:
Descaling may be interrupted, even if some
limescale remains. Descaling down to the bare metal
surface is not required.
After descaling, simmer 2–3 fillings of fresh water
and discard the water.
Storage
Once the glass kettle has cooled down and is
cleaned, proceed as follows:
If necessary, unplug the mains plug from the
protective ground socket.
Wrap the mains cable on the cable wrap of
the base station
4
.
Now store the glass kettle in a dry location.
Troubleshooting
Problem
Cause
Solution
The device is not
functional.
The device is not connected to the
protective ground socket.
Plug the mains plug into the protective
ground socket.
The water reservoir is not properly
positioned on the base station
4
.
Correctly place the water reservoir on
the base station
4
.
The ON / OFF switch
3
has not been
activated.
Push the ON / OFF switch
3
down
into the “|“ position.
The water kettle switches
off early.
The bottom of the water reservoir is
severely scaled.
Descale the kettle as described in
chapter “Cleaning and Care“.
The device does not
switch off.
The safety lid
8
is not closed correctly.
The filter cartridge is missing or inserted
incorrectly.
Close the safety lid
8
correctly. Only
operate the device with the filter car-
tridge correctly installed.
The kettle does not
switch on.
The overheating protection was acti-
vated and the device has not yet cooled
down sufficiently.
Allow the device to cool down.
In the event of malfunctions not specified here, please
contact our Customer Service Department. Our
customer service representatives will gladly assist
you. The service address is listed in our terms of
warranty.
Disposal
The product packaging is made
from recyclable materials. The
packaging material may be re-
turned to public collection sites
for recycling.
114274_silv_Wasserkocher Glas SWKG 2000 B1_content_PL_HU_CZ_SK.indd 10
06.08.15 08:53
Summary of Contents for 114274
Page 4: ...114274_silv_Wasserkocher Glas SWKG 2000 B1_cover_PL_HU_CZ_SK indd 5 06 08 15 08 53 ...
Page 12: ...12 114274_silv_Wasserkocher Glas SWKG 2000 B1_content_PL_HU_CZ_SK indd 12 06 08 15 08 53 ...
Page 36: ...36 114274_silv_Wasserkocher Glas SWKG 2000 B1_content_PL_HU_CZ_SK indd 36 06 08 15 08 53 ...
