Silvercrest 113896, Operating Instructions Manual

Page: 32 / 38

30
GB
6. Operation
NOTES:
• All adjustments can be conveniently carried out with
the remote control. The basic functions can also be car-
ried out with the buttons on the device. Operation of
the device in the instructions is usually described with
the remote control.
• The device switches to standby mode…
… if no Bluetooth connection is established within
20minutes or
… if it does not receive a signal for 20 minutes.
• Press the POWER 27 button to switch on the device
from standby mode.
6.1 Selecting the type of connection
1. Press one of the buttons AUX 17 , LINE IN 26 , OP-
TICAL 16 or 14 to switch to the desired connection
(see “Connections” on page 29).
2. On the audio device you can now start playback and
select and control the music tracks.
NOTE: in order to use the optical input, you need to set
the output of your audio device to "PCM downmix".
6.2 Sound settings
NOTES:
• Changes to the sound settings are acknowledged with
brief flashing of the LED 1 , until the minimum/maxi-
mum value has been reached.
• Controlling the levels of the treble and bass is exclu-
sively possible in the "Music" settings, after pressing
the
MUSIC 18, button.
Controlling the volume
• During playback, press the VOLUME –/+ 19 buttons.
Muting the device
1. Press MUTE 15 to switch off the sound. The LED 1
flashes.
2. To switch the sound back on, press
MUTE
again or
one of the VOLUME –/+ 19 buttons. The LED 1
lights up.
Adjusting the tone quality
• Press one of the buttons 18 , to select the pre-sets for
the tone quality for music ( MUSIC ), films ( MOVIE ) or
language ( DIALOG ).
• Press the MUSIC 18: button
- Use the TREBLE –/+ 25 buttons to adjust the treble
sounds.
- Use the BASS –/+ 21 buttons to adjust the bass
sounds.
6.3 Establishing a Bluetooth
connection
NOTES:
• The identification of the device is "SSB36A1".
• After it has been switched over to Bluetooth, the device
automatically attempts to establish a connection with
the last paired device.
• Please observe that the establishment process of the
connection may vary slightly depending on the device
and the software used.
1. Press the 14 button to switch over to a Bluetooth
connection. LED
1
flashes blue.
2. Switch on the audio device (e.g. smartphone) and start
the Bluetooth connection.
3. Press the PAIR 5 button on the device for approxi-
mately 1 second. The blue LED 1 flashes rapidly. The
audio device will now receive the device identification
"SSB36A1".
4. Establish the connection with the soundbar on the au-
dio device. If you are asked for a password, enter
"0000". Both devices are now interconnected. LED
1
now lights up in blue and a beep is heard.
NOTE: it is possible that audio devices remember the iden-
tification of the device. In this case, it may not be neces-
sary to establish the connection manually again if the
Bluetooth function is activated.
5. Now play a song on the audio device. The sound is
played back from the soundbar.
6. With the I WW 24 ,
XX
I 20 and
X
/II 23 buttons you
can select and control the music tracks.
7. Cleaning and storing
DANGER! Risk of electric shock!
~
Pull the power unit 7 out of the wall socket before you
clean the device. Make sure that no liquid gets into the
device.
• Clean the device with a slightly damp cloth. Solvents,
spirits, thinners etc. must not be used, as they can
damage the surface of the device.
• When not using the device, store it in a place where
neither high temperatures nor moisture can affect it.
Remove the battery from the remote control.
BB58B%ERRN6HLWH)UHLWDJ-XQL