Silvercrest 10-in-1 Remote Control, Operating Manual

Page: 23 / 111

- 21 -
Example:
You want to save a command chain in a Macro.
We begin in the mode "MACRO STEP".
Desired command chain:
Switch on TV => PAUSE => switch
to the AV input => switch on DVD => PAUSE => Playback
DVD.
In the mode "MACRO STEP", for this you enter the following
button commands:
=> => (Pause time) => => =>
=> (Pause time) =>
Execute a Macro
To execute a pre-programmed Macro proceed as follows:
1.
Press the MACRO button
i
.
2. With the corresponding number button
o
you access the
desired Macro (1-6). Example: If Macro 3 is to be imple-
mented press first the Macro button
i
and then, within 5
seconds, the number button " ".
To delete all Macros
To delete all pre-programmed Macros proceed as follows:
1.
Hold down the S button
r
for a little longer than 3 sec-
onds. The notice "CODE SETUP" appears.
2. With the

or

button
t
select "MACRO SETUP" and
confirm with the OK button
l
. In the display "MACRO
SETUP 1" appears.
3. With the

or

button
t
select "MACRO CLEAR" and
confirm with the OK button
l
.
4. In the LCD display
q
"CONFIRM CLEAR" (confirm
delete) appears. Confirm the delete process with the
OK button
l
. The LCD display
q
shows "SUCCESS".
All Macros are now deleted and the menu will end.
Tips:
1. When the LCD display
q
shows "CONFIRM CLEAR" you
can stop the delete process with the EXIT button
y
.
2. Individual Macros can not be deleted they can only be
overwritten.
Favourites channel
Note:
With this function you can save your preferred stations as
favourites.
To programme favourites
Your favourite stations are saved as follows:
1.
Press the device button
e
for the device that you want to
save a favourite.
2. Hold down the S button
r
for a little longer than 3 sec-
onds. The notice "CODE SETUP" appears.
BDA_KH 2159 - DT-53628_en.indd 21 30.06.2010 15:53:33