manualshive.com logo in svg

Silver 8000E, Instruction Manual

Share
Download
Silver 8000E Instruction Manual Download Page 69

64

Seam

puckering

Patterns are

distorted

1.The needle thread tension is too tight.
2.The needle thread is not threaded

correctly.

3.The needle is too heavy for the fabric

being sewn.

4.The stitch length is too long for the

fabric.

5.The presser foot pressure is not

correctly adjusted.

1.The correct presser foot is not used.
2.The needle thread tension is too tight.

1.Select the correct foot.
2.Loosen the thread tension .

1.Lossen the thread tension.
2.Rethread the machine.

3.Choose a needle to suit the thread and

fabric.

4.Make stitch dense.

5.Adjusting the presser foot pressure.

The sewing

machine

doesn't

operate

1.The machine is not turned on.

2.The presser foot lever is raised.

1.Turn on the machine.

2.Lower the presser foot lever.

The

machine

jams

Remove the upper thread and bobbin

case, turn the handwheel backwards

and forwards by hand and remove the

thread remands.

The

machine is

noisy

1.Fluff or oil have collected on the hook

or needle bar.

2.Poor quality oil has been used.

3.The needle is damaged.

1.Clean the hook and feed dog as

described.

2.Only use good quality sewing machine

oil.

3.Replace the needle.

Uneven

stitches,

uneven feed

1.Poor quality thread.
2.The bobbin case is threaded wrong.

3.Fabric has been pulled.

1.Select a better quality thread.
2.Remove the bobbin case, the thread

and reinsert correctly.

3.Do not pull on the fabric while sewing,

let it be taken up by the machine.

Problem

Cause

Correction

Reference

5.Thread is caught in the hook.

4.Slight humming sound coming from

internal motor.

4.Normal.

6.The feed dogs are packed with lint.

Remove the upper thread and bobbin

case, turn the handwheel backwards

and forwards by hand and remove the

thread remands.

1.Thread is caught in the hook.
2.The feed dogs are packed with lint.

3.Connect the power line plug to the

electric outlet.

3.The machine is not plugged in.

Page 17
Page 14

Page   9

Page 24

Page   7

Page 62
Page 17

Page 58

Page 13

Page   9

--

Page 58

Page   9

Page   6

--

Page 19
Page   6

Page 58

--

TROUBLE SHOOTING GUIDE

Summary of Contents for 8000E









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands