Control board Function
:
Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect the
controller with the fixture or one fixture with another.
DMX-OUTPUT
DMX-input
1
2
3
- Ground
- Signal (-)
- Signal (+)
1
1
2
3
- Ground
- Signal (-)
- Signal (+)
Occupation of the XLR-connection:
XLR mounting-socket:
XLR mounting-plug:
Caution:
At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a
120
resistor between Signal (-) and Signal (+) into a 3-pin XLR-plug and plug it in the
DMX-output of the last fixture.
Ω
5Pins canon(
)
plug
Pin 1: GND(SCREEN)
Pin 2: Signal(-)
Pin 3: )
Pin 4: N/C
Pin 5: N/C
3
Pin 1: GND(SCREEN)
Pin 2: Signal(-)
Pin 3: )
Pins canon(socket)
5Pins canon(socket)
Pin 1: GND(SCREEN)
Pin 2: Signal(-)
Pin 3: )
Pin 4: N/C
Pin 5: N/C
3
plug
Pin 1: GND(SCREEN)
Pin 2: Signal(-)
Pin 3: )
Pins canon(
)
The transform of the controller line of 3 pins and 5 pins (plug and socket)
6.Control board Operation
-7-
MODE
FUNCTION
CONDITION
YES--negative direction
YES--negative direction
Vertical movement in positive or negative direction
Address code set
Reset
YES--reset
Working mode
DMX512 mode
Automatic
Slave mode
Lamp switch
Lamp on
Lamp off
Software version
Lamp hot
Lamp error
