7 PIECE SENSOR & SENDING
UNIT SOCKET SET
Page 2
Product Type:
Model:
SS7KA
www.matcotools.com
1512201-14MA
SS7KA5
OIL PRESSURE SENDING
UNIT SOCKET
3/8" Drive 1" & 1-1/16"
(27mm) x 76mm
Includes a 1" and 1-1/16"
hex which allows the
removal of oil pressure
sending units.
Special deep design fits
switches up to 2-5/8".
Designed to be use with
a 3/8" drive tool or 1-1/8"
wrench.
SS7KA1
OIL PRESSURE SENDING
UNIT SOCKET
1/2" Drive x 1-3/16"
(29mm) x 90mm
Allows the removal of oil
pressure sending units on
late 1980 and mid 1990 GM
vehicles. Designed to be
used with 1/2" drive tool.
SS7KA3
INJECTOR SOCKET
1/2" Drive x 1-1/16"
(27mm) x 80mm
Allows the removal and
installation of thermal
sensor switch on 1973-1977
GM vehicles. Designed to
be used with 1/2" drive tool.
SS7KA6
HEATED OXYGEN
SENSOR SOCKET
1/2" Drive x 7/8"
(22mm) x 50mm
Socket designed with
slot which accommodates
the connectors on heat
oxygen sensors.
Socket has a double
1/2" drive for easy
access.
SS7KA2
VACUUM SWITCH SOCKET
3/8" Drive x 7/8"
(22mm) x 90mm
Designed to remove and
install vacuum switches
with 7/8" hex and some
oxygen sensors. Designed
to be used with 3/8" drive
tool or with a 1" wrench.
SS7KA4
OXYGEN SWITCH SOCKET
3/8" Drive x 7/8"
(22mm) x 80mm
Designed to remove and
install oxygen sensors in
most domestic and many
imported vehicles. Socket
designed with slot which
allows clearance of wire.
Designed to be used with
3/8" drive tool or 1" wrench.
SS7KA7
LOW PROFILE OFFSET
OXYGEN SENSOR SOCKET
3/8" Drive x 7/8"
(22mm) x 30mm
Low profile design for use
in tight spaces. Designed to
be used with 3/8" drive tool.
