Warning!
Do not exceed
the vehicle manufacturer’s specified safe load and carrying capacity.
CONNECTING TO 12 VOLT DC SUPPLY (12V Version):
The Sprayer requires a 12 volt DC power source. A 3 metre loom is provided with the sprayer to
allow the sprayer to be connected to the 12 volt DC source available. The red wire is positive and
the black is negative. If you extend the wire use wire of the same gauge or larger.
An on/off switch is fitted to the sprayer control box to allow the sprayer to be switched off from the
12 volt DC source to prevent accidental drain of power. The switch also allows the pump to be shut
down when the tank is empty preventing overheating and damage to the pump.
A 30-amp fuse is fitted to the control box to prevent any potential damage to the electrical system
of the vehicle. Consult your vehicle instruction manual for correct electrical connection.
FITTING INSTRUCTIONS:
It is recommended that the sprayer be securely attached to any ATV or other vehicle. Refer to
manufacturer’s instructions for appropriate load limits and fitting positions.
Note: 1 litre of water = 1 kg.
Never fill spray tank to a capacity beyond the specified overall weight limits set by your vehicle
manufacturer. When fitted these should be firmly secured to approved attachment points on the
ATV or other vehicle.
Installations
FUSE